Autodesk ALIAS 2010 Manual Download Page 653

Page: 653 / 746

TIP

Only the most commonly used parameters are shown in the Visualize

Panel. To access all the parameters for each shader, either double-click the
shader ball icon, or use Render > Multi-lister> Shaders.

Saving your work

Now, you will save the scene as a new file.

Choose File > Save As to open the File Browser.

Save your work in the

wire

directory of the

Lessons

project.

Name your file

myRender_Basics1.wire

Part 2: Adding a Label

In this part of the tutorial, you will take a graphic design for the label of the
shower gel bottle, and apply it to the label surface.

The process of applying the graphic is called Mapping.

The graphic file (shown on the left) is in a standard format, such as a .tif or
.jpg. It can be mapped onto a surface (shown on the right).

Part 2: Adding a Label | 647

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ALIAS 2010

Reviews:

Autodesk ALIAS 2010, Manual, Page: 653 / 746

Search results

Summary of Contents for ALIAS 2010

Reviews: