Autodesk ALIAS 2010 Page 503 Manual Download

Page: 503 / 746

You now have one complete button, in the desired orientation, so now
you will create three additional buttons.

Choose Edit > Duplicate > Object

❒

First, click the Reset button at the bottom of the option window. This
will restore all the default settings.

Then set the Number of duplicates to 3, and the Rotation to 90 degrees
in the z-axis.

Click Go to create the duplicates.

The four buttons are created.

Part 7: Completing the Model | 497

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands

Autodesk ALIAS 2010, Manual

Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands