Autodesk ALIAS 2010 Page 379 Manual Download

Page: 379 / 746

The surfaces are selected and highlighted in pink.

You are then prompted to select one of the following:

Shift select to select additional surfaces or Select curves to

PROJECT or click to select REGIONS.

This time, you will use the Trim tool to project the curve onto the
surfaces, and so you will respond to the second prompt.

Click the curve you just created to select it as a curve to project.

Part 7: Dust Bag and Cable Connector | 373

Summary of Contents for ALIAS 2010











































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands

Autodesk ALIAS 2010, Manual

Search results

Summary of Contents for ALIAS 2010

Reviews:

Related manuals for ALIAS 2010

Brands by name

Popular brands