When you access the Load Plates for Run screen by clicking Load Plates for Run
on the Assign Plate Contents screen, the plate is automatically linked (indicated
by the active Unlink button).
Figure 7
Load Plates for Run
4.
If needed, click Unlink, then follow the steps in “Link a plate (if a plate is not
5.
As needed, click Switch Plates (
) to assign the plate to the other
position in the autosampler.
Chapter 3
Set up and run
Load plates for run and create the injection list
3
60
3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1
