Applied Biosystems 3500 User Manual Download Page 216

Page: 216 / 326

View and print e-signature reports

Display the records of interest as described in “Display e-sig records“ on

page 215.

Note:

Filter the list to decrease the time required to generate reports.

Click View E-Sig Summary Report or View E-Sig Detailed Report.

(Optional) In the Report screen, click toolbar options to manipulate the report.

Place the mouse pointer over an item for a description of the item.

To print the report, click Print.

To save the report electronically (.pdf), print the report and select CutePDF

Writer as the printer.

Close the report.

Export e-sig records

As needed, you can export e-sig records to a .txt file for additional manipulation and

reporting outside the 3500 Series Data Collection Software 3.1.

Display the records of interest as described in “Display e-sig records“ on

page 215.

Select the records to export.

Click Export E-Sig Records.

Specify a name and location for the export .txt file.

Click Save.

Chapter 8

Use Security, Audit, and E-Sig functions (SAE Module)

Administrators

216

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

Summary of Contents for 3500







































































































































































































































































































































Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands

Applied Biosystems 3500, User Manual

Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands