Applied Biosystems 3500 User Manual Download Page 243

Page: 243 / 326

IMPORTANT!

The customer is responsible for validation of archive, restore, and

purge functions.

• Archive—Makes a copy of the data in an external file that you can save in

another location.

• Purge—Allows you to delete (purge) user-created items stored in the library.

Factory-provided items are not purged. You have an option to archive the items,

also.

• Restore—Restores archived data back to the system.

IMPORTANT!

These functions affect items stored in the library (datastore). These

functions do not affect sample data files.

Frequency

We recommend that you purge the library objects once every three months.

Archive library items

Access the Archive screen.

Specify the date category, specify a date range that is earlier than the date on

which you made the duplicates of the library items you want to retain, then click

OK.

Archive, purge,

and restore data

Chapter 9

Maintain the Instrument

Maintain the computer

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

243

Summary of Contents for 3500







































































































































































































































































































































Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands

Applied Biosystems 3500, User Manual

Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands