Applied Biosystems 3500 User Manual Download Page 200

Page: 200 / 326

View and print a user report

Select the User or Roles tab. Click View Report.

In the Report screen, click toolbar options to manipulate the report as needed.

Place the mouse pointer over an item for a description of the item.

To print the report, click Print. Close the report.

Save electronic copies (pdf) of the report

To save the report electronically (.pdf), print the report and select CutePDF Writer as

the printer.

Chapter 8

Use Security, Audit, and E-Sig functions (SAE Module)

Administrators

200

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

Summary of Contents for 3500







































































































































































































































































































































Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands

Applied Biosystems 3500, User Manual

Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands