Applied Biosystems 3500 User Manual Download Page 140

Page: 140 / 326

IMPORTANT!

Auditing of an item depends on whether it is created directly from the

library or from within another item (for example, you can create an assay directly

from the library, or within a plate in the Assign Plate Contents screen). For more

information on auditing, see “Review the object audit history“ on page 205.

Select the factory-provided entry in the library.

Click Duplicate.

Enter a name for the item.

Select the item, then click Edit.

Modify parameters as needed (see the appropriate section for information).

Click Save.

IMPORTANT!

Auditing of an item depends on whether it is deleted directly from the

library or from within another item (for example, you can delete an assay directly

from the library, or within a plate in the Assign Plate Contents screen). For more

information on auditing, see “Review the object audit history“ on page 205.

Note:

You cannot delete

or factory-provided items.

Select an item, then click Delete.
Deleting a library entry does not affect existing items that contain the entry. (When

you select an item to include in a higher-level item, a copy of that item is included in

the higher-level item. For example, when you select an instrument protocol to include

in an assay, a copy of the instrument protocol is included in the assay. If you delete the

instrument protocol, the copy of the instrument protocol in the assay remains intact.)
For information on how deleted items are tracked in auditing, see “Audit action“ on

page 205.

IMPORTANT!

Auditing of an item depends on whether it is edited directly from the

library or from within another item (for example, you can edit an assay directly from

the library, or within a plate in the Assign Plate Contents screen). For more

information on auditing, see “Review the object audit history“ on page 205.

Note:

To edit a plate template, select the template from the main workflow. Go to

Define Plate Properties

Open Plate

Edit Existing Template.

Select an item, then click Edit.

Modify parameters as needed.

Click Save.

Create a new

entry from a

factory-provided

template or

locked entry

Delete a library

entry

Edit a library entry

Chapter 7

Manage library resources

General library procedures

140

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

Summary of Contents for 3500







































































































































































































































































































































Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands

Applied Biosystems 3500, User Manual

Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands