manualshive.com logo in svg

Applied Biosystems 3500, User Manual

Welcome to manualshive.com, your go-to destination for free downloads of user manuals. Find the user manual for Samsung 3500 here and enhance your product experience. Get step-by-step instructions, troubleshooting tips, and everything you need to make the most out of your Samsung 3500, all just a download away.

Share
Download
background image

Load the plate in the instrument . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Link the plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Quick Start a run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Load plates for run and create the injection list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Link a plate (if a plate is not linked) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Link a plate from the Recent Plates or Recent Runs tab . . . . . . . . . . . . . . . . . . . . . . . . . 62

Review and modify the injection list in 

Preview Run

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Start the run from 

Preview Run

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Monitor the run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Check sequence or sample quality and re-inject samples . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Check sequence or sample quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Re

‑

inject samples from the 

Monitor Run

 screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

If you select a protocol other than the original . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
How re-injections are displayed in the plate view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Re-inject HID allelic ladder samples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Review completed injections in 

Review Results

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Pause, resume, or stop a run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Pause and resume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Abort or terminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

More features in Assign Plate Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Name samples in the plate view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Customize the plate view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
View the capillary-to-plate map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Use the table view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Sort by one or multiple columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Customize a table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Add assays, file name conventions, and results groups to a plate . . . . . . . . . . . . . . . . 77
Create a plate import template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Create a plate import file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Edit a plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Import and export a plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Create a plate template . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Specify the default plate type for the 

Open Plate

 dialog box . . . . . . . . . . . . . . . . . . . . . 80

Save electronic version of reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

More features in Monitor Run . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Review the 

Instrument Run

 views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Array

 view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Sample

 view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

EPT view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

■

CHAPTER 4    

Review sequencing results .............................. 82

Workflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Access the View Sequencing Results screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Review results for the currently running sequencing plate . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Contents

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

5

Summary of Contents for 3500







































































































































































































































































































































Reviews:

No comments

Related manuals for 3500

Calsense ET2000 Setup preview
ET2000
Brand: Calsense Pages: 4
Tascam SX-1 Application Manual preview
SX-1
Brand: Tascam Pages: 4
Harpers NL-404 Service Manual preview
NL-404
Brand: Harpers Pages: 8
Macherey-Nagel NANOCOLOR UV/VIS II Manual preview
NANOCOLOR UV/VIS II
Brand: Macherey-Nagel Pages: 99
Omano CX-3 User Manual preview
CX-3
Brand: Omano Pages: 14
OBDPROG MT401 Manual preview
MT401
Brand: OBDPROG Pages: 8
Danfoss LLG Installation Manual preview
LLG
Brand: Danfoss Pages: 4
Leica DISTOTM D5 Quick Start preview
DISTOTM D5
Brand: Leica Pages: 2
MATO DIGIMET E30 Preset Operating Instructions Manual preview
DIGIMET E30 Preset
Brand: MATO Pages: 20
ASCOM TEMS AUTOMATIC - 2 Brochure preview
TEMS AUTOMATIC - 2
Brand: ASCOM Pages: 12
Halma SENSITRON SMART S Short Installation Manual preview
SENSITRON SMART S
Brand: Halma Pages: 12
Quarton ML-400 Instructions preview
ML-400
Brand: Quarton Pages: 2
Horiba Scientific LAQUA F-74BW Quick Manual preview
LAQUA F-74BW
Brand: Horiba Scientific Pages: 2
SensorLink 6-120 Operator'S Manual preview
6-120
Brand: SensorLink Pages: 12
DAPAudio IEM-100 Beltpack Product Manual preview
IEM-100 Beltpack
Brand: DAPAudio Pages: 17
Sonel CMP-400 Operating Manual preview
CMP-400
Brand: Sonel Pages: 26
Solinst 101 P2 Replacement Manual preview
101 P2
Brand: Solinst Pages: 2
Jaquet T411 Operating Instructions Manual preview
T411
Brand: Jaquet Pages: 27

Brands by name

Popular brands

Load more brands