Applied Biosystems 3500 User Manual Download Page 86

Page: 86 / 326

Review warnings:

Result

Description

Success

Basecalling and trimming successful.

Success with

warning

Basecalling successful, trimming not successful.

Warning messages are listed in the Warning/Error

Message column (default position is the last column

in the table).

Fail

Basecalling and trimming failed, no results

generated.

Error

Basecalling and trimming failed due to internal

software error, no results generated.

Unclassified

No analysis performed.

(Optional) Click Minimize and Restore to collapse and expand the samples table.

Review traces

Select the samples of interest in the samples table, then click

Open Trace.

Select items from the trace toolbar to manipulate the trace as needed. Place the

mouse pointer over a button for the description of the button.

(Optional) Modify trace display:

• Use the Tile Viewer options to display up to four traces at a time.

• Set trace colors in Preferences (see “Overview“ on page 36).

Chapter 4

Review sequencing results

Review traces

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

Summary of Contents for 3500







































































































































































































































































































































Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands

Applied Biosystems 3500, User Manual

Search results

Summary of Contents for 3500

Reviews:

Related manuals for 3500

Brands by name

Popular brands