Anrtisu Cell Master MT8212B, User Manual, Page: 93 / 294

GSM Mode (Option 40)
The following section explains the hard keys and soft keys available when the Cell Master
is set to GSM mode.
FREQ/DIST Choosing FREQ/DIST in GSM mode causes the soft keys, below, to be dis-
played and the corresponding values to be shown in the message area.
q
Center
¾ Sets the center frequency. Enter a value using the Up/Down arrow
key or keypad, press ENTER to accept, ESCAPE to restore the previous
value.
q
Signal Standard
¾ Opens a menu of soft keys used to select the signal stan-
dard to be used. For more information on signal standards, refer to Appendix
C.
NOTE: The list of Signal Standards may be updated when a new firmware up-
date is installed. Hold the SYS key while turning on the unit to reset the unit to
the factory defaults and update the Signal Standards list after installing a new
firmware release. Handheld Software Tools (Chapter 18) can also be used to
manually update the list.
Chapter 2 Functions and Operations
2-69
MODE = GSM:
SOFTKEYS:
Center
Page
Up
Page
Up
Signal
Standard
Ext
Ref
Freq
Select
Standard
Page
Down
Page
Down
Select
Channel
dBm/
Watts
Power
Offset
Top
of
List
Top
of
List
Back
Bottom
of
List
Bottom
of
List
Show
All
Show
Selected
Select/
Deselect
FREQ/DIST
AMPLITUDE MEAS/DISP
Spectrum
Power vs.
Time
(Frame)
Power vs.
Time
(Slot)
Edit
Measure
Offset
Back
Ref
Level
Offset
Figure 2-25. GSM Mode Softkey Menu Map