Anrtisu Cell Master MT8212B, User Manual, Page: 243 / 294

Each screen full of 401 data points will be stored as a separate display, and can
be saved for up to seven days.
Signal ID
Signal Identification is used to determine, if possible, the air interface standard of a signal.
If the instrument is unable to determine the modulation format, it will display the estimated
bandwidth of the signal.
Procedure:
The following procedure demonstrates a common Interference Analyzer Signal ID setup.
To select Interference Analyzer mode:
Step1.
On the Cell Master, press the MODE key, use the Up/Down arrow key to select
the
Interference Analyzer
mode and press ENTER .
Step2. Press the MEAS/DISP key and select the
Signal ID
soft key.
Step3. Press the Set
IA Freq
soft key, enter the appropriate frequency to analyze the in-
terfering signal, and press ENTER . Alternatively, if marker M1 is on, press the
IA Frequency as Marker M1
soft key to set the IA frequency to the current M1
frequency.
Step4. Press the
Measure
soft key to start the measurement. A message box on the
screen states that the analysis is in process, then, when the measurement is com-
Chapter 15 Interference Analysis
15-5
Figure 15-3. RSSI Display