Anrtisu Cell Master MT8212B, User Manual, Page: 118 / 294

q
CDP
— When CDP is selected, the data can be displayed as a MAC Code
power screen or Data Code Power screen.
q
MAC Code Power
— In the Mac Code Power screen, Pilot & MAC power
(dBm), Rho Overall 1, Rho Pilot, Data Modulation, and Noise Floor will
be displayed and the three strongest pilots will be displayed in Over The
Air (OTA) measurement mode.
q
Data Code Power
— In the Data Code Power screen, Data Power (dBm),
Rho Overall 1, Data Modulation, Data Code Max (dB), Data Code Min
(dB), and Pilot Scan Results will be displayed.
q
Back
— Returns to the previous menu.
q
Text Only
— Displays Pilot and MAC Power (dBm) critical parameters in a
table format: Pilot Power, Data Power, Channel Power (RMS), Frequency Er-
ror, Data Modulation, PN Offset, Tau, Rho Pilot, Rho Overall 1, Rho Overall
2, Overall EVM, and Carrier Feed Through.
q
Over The Air Meas
— Select either Pilot Scan or Mutlitpath display.
q
Pilot Scan
— Displays the six strongest pilots with Tau and Ec/Io
q
Multipath
— Displays the two strongest multipaths with Ec/Io related to
the strongest pilot.
q
RF Meas
— Displays the data as Idle or Active Slot information.
q
Idle
— Displays Pilot & MAC power (dBm), Frequency Error (Hz), Mea-
sured Occupied Bandwidth (kHz), Channel Power (RMS), Idle Activity
(%), and Idle Data Power (dBm).
q
Active
— Displays Pilot & MAC power (dBm), Frequency Error (Hz),
Measured Occupied Bandwidth (kHz), Channel Power (RMS), Active Ac-
tivity (%), and Active Data Power (dBm).
q
Back
— Returns to the previous menu.
q
Setup
— The Setup menu is used to determine the settings for the CDMA
measurement.
q
PN Search
— To determine PN Numbers and timing errors, the Cell Mas-
ter needs a timing reference. The timing can come from the base station
when the Cell Master is connected to the base station or it can be recov-
ered from GPS when a GPS antenna is connected to the Cell Master.
q
GPS Auto
— The Cell Master uses GPS as the timing reference, and
automatically detects the strongest pilot. The GPS antenna must be
connected to the Cell Master GPS antenna connector. GPS must be
turned on under Sys|GPS|GPS On/Off and the GPS must be locked to
the satellites before GPS Auto can be used.
q
GPS Manual
— The Cell Master uses GPS as the timing reference,
but it searches only for the specified PN. The GPS antenna must be
connected to the Cell Master GPS antenna. GPS must be turned on un-
der
Sys|GPS|GPS On/Off
and the GPS must be locked to the satellites
before GPS Manual can be used.
q
External Auto
— The Cell Master uses an external even second time
mark as the timing reference. The time mark is usually available at the
base station on a BNC connector labeled as "ESTM" or "PP2S." The
ESTM must be connected to the
CDMA Timing Input
connector on the
Cell Master. The Cell Master will automatically detect the strongest
pilot.
2-94
Chapter 2 Functions and Operations