Anrtisu Cell Master MT8212B, User Manual, Page: 69 / 294

q
Upper / Lower Limit
— Selects whether the measurement will fail if the
data is above the limit line or below the limit line, as indicated in the mes-
sage area of the display.
q
Back
— Returns to the previous menu level.
q
Multiple Upper Limits
— Sets multiple user-defined upper limits, and can be
used to create an upper limit mask for quick pass/fail measurements. An up-
per limit will result in a failure when the data falls above the limit line. Menu
choices are:
q
Segment 1-5
— View/edit upper limit segment 1-5.
q
On/Off
— Turns the segment on or off.
q
Edit
— Opens the segment parameters for editing (see Adjusting Seg-
mented Limits, page 3-17).
q
Prev Segment
— Edit or view the parameters of the previous seg-
ment.
q
Next Segment
— Edit or view the parameters of the next segment. If
the next segment is off when this button is pressed, the starting point
of the next segment will be set equal to the ending point of the current
segment (if the current segment is on).
q
Back
— Returns to the previous menu level
q
Back
— Returns to the previous menu level
q
Multiple Lower Limits
— Set multiple user-defined lower limits, and can be
used to create a lower limit mask for quick pass/fail measurements. A lower
limit will result in a failure when the data falls below the limit line. Menu
choices are:
q
Segment 1-5
— View/edit lower limit segment 1-5.
q
On/Off
— Turns the segment on or off.
q
Edit
— Opens the segment parameters for editing (see Adjusting Seg-
mented Limits, page 3-17).
q
Prev Segment
— Edit or view the parameters of the previous seg-
ment.
q
Next Segment
— Edit or view the parameters of the next segment. If
the next segment is off when this button is pressed, the starting point
of the next segment will be set equal to the ending point of the current
segment (if the current segment is on).
q
Back
— Returns to the previous menu level
q
Back
— Returns to the previous menu level.
q
Limit Beep
— Turns the audible limit beep indicator on or off. When the limit
beep indicator is on, an audible beep will occur at every data point that ap-
pears above the upper limit or below the lower limit.
Chapter 2 Functions and Operations
2-45