q
Month
— Enter the month (1-12) using the Up/Down arrow key or the
keypad. Press
ENTER
when data entry is complete or
ESCAPE
to
restore the previous value.
q
Day
— Enter the day using the Up/Down arrow key or the keypad.
Press
ENTER
when data entry is complete or
ESCAPE
to restore the
previous value.
q
Year
— Enter the year (2003-2036) using the Up/Down arrow key or
the keypad. Press
ENTER
when data entry is complete or
ESCAPE
to restore the previous value.
q
Back
— Returns to the top-level SYS menu.
q
Printer
— Displays a menu of supported printers. Use the Up/Down arrow
key and
ENTER
key to make the selection.
q
Units
— Select the unit of measurement (metric or English).
q
Change Date Format
— Toggles the date format between
MM/DD/YYYY, DD/MM/YYYY, and YYYY/MM/DD.
q
Back
— Returns to the top-level SYS menu.
q
Application Options
— Application options displays options applicable to par-
ticular mode.
q
External Ref Freq
— Set the external reference frequency from 2 MHz to
20 MHz.
q
Impedance
— Sets the input impedance of the instrument
q
50
W
— Sets the input impedance of the instrument to 50
W
, which is
the default setting.
q
75
W
Anritsu 12N50-75B — Displays measurements as if the input
impedance was 75
W
. The actual input impedance is still 50
W
, but the
displayed information is transformed to the equivalent 75
W
value
based on the offset value specified by the adapter used in the measure-
ment. This setting is commonly used for cable TV-related measure-
ments. Pressing this soft key will also compensate 7.5 dB for the loss
of the Anritsu 12N50-75B adapter.
q
Other adapter Offset
— This key allows the user to enter other adapter
offset values. Enter the desired loss using the keypad or Up/Down ar-
row key and press the
ENTER
key to accept.
q
Back
— Returns to the previous menu.
q
Back
— Returns to the top-level SYS menu.
q
Self Test
— Start an instrument self test.
q
Status
— In cable and antenna analyzer freq or dist measurement mode, dis-
plays the current instrument status, including calibration status, temperature,
and battery charge state. Press
ESCAPE
to return to operation.
q
GPS
— Opens the GPS soft key menu.
q
Press the
GPS On/Off
soft key to turn the GPS feature on or off.
q
Press the
Location
soft key to view the latitude, longitude and altitude in-
formation and UTC timing.
2-64
Chapter 2 Functions and Operations
Summary of Contents for Cell Master MT8212B
