Anrtisu Cell Master MT8212B, User Manual, Page: 53 / 294

Power Meter (Internal) Mode
Selecting
Power Meter (Internal)
from the mode menu causes the soft keys, described be-
low, to be displayed and the corresponding values shown in the message area.
FREQ/DIST Choosing FREQ/DIST in Power Meter mode causes the soft keys, below, to be
displayed and the corresponding values to be shown in the message area.
q
Center
— Activates the center frequency function and sets the power meter to
the center frequency. A frequency from 4.5 MHz to 2.9985 MHz can be en-
tered.
q
Span
— Opens the parameter for editing and activates a menu of span related
choices.
q
Edit
— Allows editing of the span to enter specific frequency.
q
Full
— Sets the power meter to its maximum frequency span.
q
Min
— Minimum span in Power Meter mode is 3 MHz.
q
Span Up 1-2-5
— Activates the span function so that the span may be in-
creased quickly in a 1-2-5 sequence.
q
Span Down 1-2-5
— Activates the span function so that the span may be
reduced quickly in a 1-2-5 sequence.
Chapter 2 Functions and Operations
2-29
MODE=POWER METER:
SOFTKEYS:
Center
Off
Edit
Span
Low
Full
Signal
Standard
Medium
Min
High
Units
Rel
Offset
Zero
Span
Up
1-2-5
Back
Back
Span
Down
1-2-5
FREQ/DIST AMPLITUDE MEAS/DISP
RMS
Averaging
Select
Channel
Downlink
Uplink
Page
Up
Select/
Deselect
Show
Selected
Page
Down
Back
Bottom
of
List
Select
Standard
Top
of
List
Figure 2-12. Power Meter Mode Soft Key Labels