Anrtisu Cell Master MT8212B, User Manual, Page: 236 / 294

NOTE: Frequency error measurements are only as accurate as the reference
frequency. Frequency error measurements without an external reference fre-
quency are not accurate.
AMPLITUDE Press the AMPLITUDE key to change amplitude configurations.
q
dBm/Watts
– Choose to display the measurement results in either dBm or
Watts.
q
Power Offset
– Choose Power Offset to have the Cell Master automatically
adjust for the loss through any external cables, attenuators, and couplers.
NOTE: If the loss is not known, Option 21, Transmission Measurement, or the
Offset Calibration can be used to measure the loss of the system.
By default, the Cell Master will automatically change attenuation, preamplifier and digital
gain settings to make the best GSM measurements.
MEAS/DISP Press the MEAS/DISP key to change measurement and display settings.
q
Spectrum
– Display the GSM spectrum
14-2
Chapter 14 GSM Measurement
Figure 14-1. GSM Spectrum Display