Demodulator, cdmaOne and CDMA2000 Measurements
To demodulate cdmaOne and CDMA2000 1xRTT signals, connect the Cell Master to the
base station following the setup instructions.
Step 1.
On the Cell Master, press the
MODE
key, use the Up/Down arrow key to select
the
CDMA
mode and press
ENTER
.
Step 2.
Select the
Signal Standard
soft key and press the
Select Standard
soft key. Use
the soft keys or the Up/Down arrow key to highlight the appropriate standard,
such as
CDMA US PCS
, and press
ENTER
.
Step 3.
Press the
Select Channel
soft key and use the Up/Down arrow key or the nu-
meric keypad to enter the appropriate channel, such as
50
, and press
ENTER
.
Step 4.
Press the
MEAS/DISP
key and select the
Setup
soft key to open Setup menu.
Step 5.
Press the
PN Search
soft key and choose
External Auto
when the Cell Master is
connected to the base station following the setup instructions.
Step 6.
Press
Back
to go to the previous menu.
Step 7.
Press the
Walsh Codes
soft key to choose 64 or 128 codes depending on the
transmitting signal.
NOTE: 64 Walsh codes can be displayed when the unit is in 128 code mode
and the Walsh codes will be repeated.
Step 8.
Press
Back
twice to go back to the measurements menu.
Step 9.
Press the
CDP
soft key to display the Code Domain Power of 64 or 128 Walsh
codes.
Chapter 13 CDMA Measurement
13-7
Figure 13-2
CDMA. Code Domain Power Display, 64 Codes
Summary of Contents for Cell Master MT8212B
