Anrtisu Cell Master MT8212B, User Manual, Page: 127 / 294

InstaCal Error Messages
If the serial number of the connected InstaCal module does not match the serial number
stored in the Cell Master, the following message is displayed:
The InstaCal characterization data stored in the Cell Master
is for a module different than the one currently connected.
Cell Master contains data for InstaCal module S/N: xxxxx
Currently connected InstaCal Module S/N: xxxxx
Would you like to overwrite the previously loaded InstaCal characterization?
Press the
YES
soft key to update the stored InstaCal characterization to use the currently
connected module.
Press the
NO
soft key to keep the stored InstaCal characterization.
A listing of possible InstaCal error messages is provided in Table 2-5.
Bias Tee Error Message (Option 10A only)
The following error message will display if there is an excessive load on the RF In port
while using the Bias Tee option.
Error Message Description
Bias Tee Fault. Excessive Load on the Rf In port. Fix Error to continue. Possible fixes
include:
1. Remove the excessive load from the RF In port
2. Turn off the Bias-Tee option
Chapter 2 Functions and Operations
2-103
Error Message Description
Failed to read serial
number of InstaCal
module
The Cell Master was unable to read the InstaCal module serial number.
Failed to success-
fully transfer
InstaCal module
data to Cell Master
The Cell Master was unable to transfer all necessary data between the
InstaCal module and the Cell Master.
Failed to set baud
with InstaCal
module
The Cell Master was unable to establish communication with the
InstaCal module.
Table 2-5. InstaCal Error Messages