Anrtisu Cell Master MT8212B, User Manual, Page: 61 / 294

High Accuracy Power Sensor Mode (Option 19)
Selecting
High Accuracy Power Sensor
from the mode menu causes the soft keys, described
below, to be displayed and the corresponding values shown in the message area.
FREQ/DIST Choosing the FREQ/DIST key causes the soft keys, below, to be displayed and
the corresponding values to be shown in the message area.
q
Center
¾ Sets the center frequency of the Spectrum Analyzer. Enter a value
using the Up/Down arrow key or keypad, press ENTER to accept, ESCAPE
to restore previous value.
q
Signal Standard
¾ Opens a menu of soft keys used to select the signal stan-
dard to be used. For more information on signal standards, refer to Appendix
C.
q
Select Standard
¾ Opens the signal standard menu, showing the currently
selected signal standards. Use the soft keys to navigate the list. Press the
Show All
soft key to show the complete signal standard list. When the
complete list is displayed, the currently selected signal standards are
marked with an asterisk. Press the
Show Selected
soft key to show only
the currently selected signal standards.
q
Select Channel
¾ Sets the channel information for the available standard.
q
Uplink
¾ Selects only uplink frequencies.
q
Downlink
¾ Selects only downlink frequencies.
Chapter 2 Functions and Operations
2-37
MODE=HIGH ACCURACY POWER SENSOR
SOFTKEYS:
Center
Signal
Standard
Offset
dB
Zero
Rel
FREQ/DIST AMPLITUDE
Max
Hold
Limit
ON/OFF
Lower
Limit
Upper
Limit
Limit
Units
Running
Averages
MEAS/DISP
Downlink
Channel
Increment
Uplink
Page
Up
Select/
Deselect
Show
Selected
Page
Down
Back
Bottom
of
List
Select
Standard
Top
of
List
Select
Channel
Figure 2-16. High Accuracy Power Sensor Mode (Option 19) Soft Keys