NOTE
: Only setups from the current mode are displayed.
Save and Recall a Display
Saving a Display
The following procedure saves a display to memory.
Step 1.
Press the
SAVE DISPLAY
key to activate the alphanumeric menu for trace
storage.
Step 2.
Use the soft keys to enter a label for the saved trace.
For example, to save a display with the name “TX1 RETURN LOSS” press the
soft key group that contains the letter “T” then press the “T” soft key. Press the
soft key group that contains the letter “X” then press the “X” soft key. Press the
number “1” key on the numeric keypad. Use the soft keys and keypad as neces-
sary to enter the entire name, then press
ENTER
to complete the process.
NOTES
: More than one trace can be saved using the same alphanumeric
name, as traces are stored chronologically, using the time/date stamp.
Pressing the
SAVE DISPLAY
key will bring up the last saved trace name on
the input line. Pressing the Delete soft key will erase the entire trace name. To
erase only one character of a trace name, press the Up/Down arrow key to se-
lect the character, then press the Delete soft key. This feature can be useful
when naming traces sequentially, such as: Trace 1, Trace 2, etc.
Measurement traces will be saved with GPS coordinates when GPS is active.
GPS data is also automatically saved in the instrument memory until the unit is
turned off, so measurement traces can be saved with the saved GPS coordi-
nates even when the GPS is inactive.
Recalling a Display
The following procedure recalls a previously saved display from memory.
Step 1.
Press the
RECALL DISPLAY
key.
Step 2.
Select the desired display using the Up/Down arrow key.
Step 3.
Press
ENTER
to recall the display.
Changing the Units
By default, the Cell Master displays information in metric units. Use the following proce-
dure to change the display to English units when in cable and antenna analyzer mode.
Step 1.
Press the
SYS
key.
Step 2.
Select the
System Options
soft key.
Step 3.
Press the
Units
soft key to change from metric to English measurement units, or
vice versa. The current selection is displayed at the bottom left corner of the
screen.
Chapter 3 Getting Started
3-15
Summary of Contents for Cell Master MT8212B
