1-10
Chapter 1 General Information
EVDO:
Idle and active power versus time graph
cdmaOne and CDMA2000 1xRTT Demodulator (Option 43)
Residual Rho:
³
0.98 for RF input from +20 dBm to –48 dBm
Rho Accuracy:
±
0.01 for
r ³
0.9
Code domain power (CDP):
Accurate to within ±1.5 dB above –20dB for RF input
from +20dBm to –48 dBm
CDP can be displayed for RF input from +20dBm to –90 dBm
Tone Generator: Frequency: 100 Hz to 3000 Hz
Level: –30 to 0 dBm, 1 dB steps
Carrier Freq Error:
±
50 Hz 99% confidence level
Power Accuracy:
±
1 dB typical (
±
1.5 dB absolute)
PN Offset:
within 1
´
64 chips
Pilot Time Alignment (tau):
within 2 chips
Pilot Power:
±
1.5 dB typical
T1 Analyzer (Option 50)
Line Coding:
AMI, B8ZS
Framing Modes:
D4 (Superframe), ESF (Extended Superframe)
Connection Configurations:
Terminate (100
W
)
Bridge (
³
1000
W
)
Monitor (Connect via 20 dB pad in DSX)
Receiver Sensitivity:
0 to –36 dBdsx
Transmit Level:
0 dB, –7.5 dB, and –15 dB
Clock Sources:
External
Internal: 1.544 MHz ± 30 ppm
Pulse Shapes:
Conform to ANSI T1.403
Pattern Generation & Detection: PRBS: 2-9, 2-11, 2-15, 2-20, 2-23 Inverted and non-inverted,
QRSS, 1-in-8 (1-in-7), 2-in-8, 3-in-24, All ones, All zeros,
T1-Daly, User defined (
£
32 bits)
Circuit Status Reports:
Carrier present, Frame ID and Sync., Pattern ID and Sync.
Alarm Detection:
AIS (Blue Alarm), RAI (Yellow Alarm)
Error Detection:
Frame Bits, Bit, BER, BPV, CRC, Error Sec
Error Insertion:
Bit, BPV, Framing Bits, RAI, AIS
Loopback Modes:
Self loop, CSU, NIU, user defined, In-band or Data Link
Level Measurements:
Vp-p (± 5%), dBdsx
Data Log:
Continuous, up to 48 hrs
T1 Frequency:
±
10 ppm
Table 1-1.
Performance Specifications (5 of 7)
Summary of Contents for Cell Master MT8212B
