Anrtisu Cell Master MT8212B, User Manual, Page: 86 / 294

the appropriate soft key for Hz, kHz, MHz or GHz. Press ENTER to accept
the input.
q
Signal Standard
¾ Opens a menu of soft keys used to select the signal stan-
dard to be used.
q
Select Standard
¾ Opens the signal standard menu, showing the currently
selected signal standards. Use the soft keys to navigate the list. Press the
Show All
soft key to show the complete signal standard list. When the
complete list is displayed, the currently selected signal standards are
marked with an asterisk. Press the
Show Selected
soft key to show only
the currently selected signal standards.
q
Start Channel
¾ Sets the channel information for the available standard. If
the particular standard has not been used before, the channel number will
default to the lowest legal channel number for that standard. If that stan-
dard has been used before, the last used channel will be the default.
q
Uplink
¾ Selects the bank of frequencies that correspond to signals sent
from the client transmitter to the base station.
q
Downlink
¾ Selects the bank of frequencies that correspond to the signals
sent from the base station to the client receivers.
q
Back
¾ Returns to the previous menu.
q
Channel Step Size
¾ This integer value tells the system how many channels
to skip when scanning. Enter a step size from 1 to 1023 using the Up/Down
arrow key or the keypad and press ENTER to accept the input. Channel Step
Size is especially useful when channels overlap, such as CDMA and WiFi
channels.
q
Channel Span
— Channel Span sets the width of each channel. Enter a Chan-
nel Span from 0 to 3000 MHz using the Up/Down arrow key, or the keypad
and the appropriate soft key for Hz, kHz, MHz or GHz. Press ENTER to ac-
cept the input.
AMPLITUDE Choosing AMPLITUDE causes the soft keys, below, to be displayed and the
corresponding values to be shown in the message area.
q
Ref Level
— Reference Level sets the power level at the top of the display.
Enter a value from +20.0 to –120.0 dBm, in 0.1 dB steps, using the Up/Down
arrow key or the keypad and press ENTER to accept the input. The currently
selected reference level is shown in the message area at the bottom of the dis-
play.
q
Scale
— Scale sets the number of dB per division. Enter a value from 1 dB
per division to 15 dB per division using the Up/Down arrow key or the key-
pad and press ENTER to accept the input. The currently selected scale is
shown in the message area at the bottom of the display.
MEAS/DISP Pressing MEAS/DISP activates a menu of channel and display functions. Use
the corresponding soft key to select the desired function.
q
Number of Channels
— Number of Channels sets how many channels are si-
multaneously shown on the display. Enter a value from 1 to 20 channels us-
ing the Up/Down arrow key or the keypad and press ENTER to accept the
input.
2-62
Chapter 2 Functions and Operations