1-11
Chapter 1 General Information
DS0 Channel Access
Tone Generator
Frequency: 100 Hz to 3000 Hz
Level: –30 to 0 dBm, 1 dB steps
Audio Monitor:
Manually select channel 1-24
VF Measurement:
Frequency: 100 Hz to 3000 Hz,
±
2 Hz
Level: –40.0 to +3.0 dBm,
±
0.2 dBm
ITU-T G.821 Analysis:
Errored seconds, error free seconds, severely errored
seconds, unavailable seconds, available seconds, degraded
minutes
E1 Analyzer (Option 50)
Line Coding:
AMI, HDB3
Framing Modes:
PCM30, PCM30CRC, PCM31, PCM31CRC
Connection Configurations:
Terminate (75
W
, 120
W
)
Bridge (
³
1000
W
)
Monitor (Connect via 20 dB pad in DSX)
Receiver Sensitivity:
0 to –43 dB
Clock Sources:
External
Internal, 2.048 MHz ± 30 ppm
Pulse Shapes:
Conform to ITU G.703
Pattern Generation and Detection:
PRBS: 2-9, 2-11, 2-15, 2-20, 2-23 Inverted and
non-inverted, QRSS, 1-in-8 (1-in-7), 2-in-8, 3-in-24,
All ones, All zeros, T1-Daly, User defined (
£
32 bits)
Circuit Status Reports:
Carrier present, Frame ID and Sync., Pattern ID and Sync.
Alarm Detection:
AIS, RAI, MMF
Error Detection:
Frame Bits, Bit, BER, BPV, CRC, E-Bits, Error Sec
Error Insertion:
Bit, BPV, Framing Bits, RAI, AIS
Loopback Modes:
Self loopback
Level Measurements:
Vp-p (± 5%), dBdsx
Data Log:
Continuous, up to 48 hrs
E1 Frequency:
±
10 ppm
VF Channel Access
Tone Generator
Frequency: 100 Hz to 3000 Hz
Level: –30 to 0 dBm
Audio Monitor:
Manually select channel 1-31
VF Measuremen:
Frequency: 100 Hz to 3000 Hz
±
2 Hz
Level: –40.0 to +3.0 dBm
±
0.2 dBm
Table 1-1.
Performance Specifications (6 of 7)
Summary of Contents for Cell Master MT8212B
