Anritsu Mainframe MU909060A Series, Operation Manual, Page: 99 / 190

3.2 Application Ethernet Setup
3-11
IPv4 setup pane (continued)
1
2
3
3
Ether
n
et Applicat
ion
4
5
6
Figure 3.2.1-11 Interface Setup Screen, IPv4 Setup Pane
[1] Putting a checkmark in the More fragments (MF) checkbox sets the
More fragments bit in the flags section of the IP header.
[2] Putting a checkmark in the Don’t fragment (DF) checkbox sets the
Don’t fragment bit in the flags section of the IP header.
[3] Putting a checkmark in the Reserved (RES) checkbox sets the
Reserved bit in the flags section of the IP header.
[4] Sets Fragment Offset
[5] Sets TTL value
[6] Sets Protocol value
When UDP (See Figure 3.2.1-14) or TCP (See Figure 3.2.1-15) is
selected at the UDP or TCP Interface Setup panes this field displays
the corresponding protocol value.