Anritsu Mainframe MU909060A Series, Operation Manual, Page: 108 / 190

Chapter 3 Application Ethernet
3-20
3.2.4 Test Automator
The Test Automator function selects the test or series of tests to run.
This initial setup screen is displayed when Test Automator is selected.
Figure 3.2.4-1 Test Automator Setup Screen
The Test Automator screen has the following soft keys.
Status (F1)
Returns to status screen
Setup (F2)
Displays setup selector shown in Figure 3.2-1.
Result (F3)
Displays results summary
The Test schedule box is navigated using the Up, Down, Left and Right
arrow keys. The red square shown in Figure 3.2.4-1 indicates the current
selection. To set the selection, press the Set key.
After the required tests have been set in Test schedule box press the
Start key to start.