Anritsu Mainframe MU909060A Series, Operation Manual, Page: 176 / 190

Appendix A Specifications
A-2
A.1 Specifications
Table A.1-1 Specifications
Items Specifications
Controller number
Controller name MT9090A
Main Frame
Module number
Module name
Application MU909060A1, MU909060A2, MU909060A3
Gigabit Ethernet module
Installation
Commissioning
QoS Verification
In-service troubleshooting
Multistream (SW option)
RFC 2544 Test (SW option)
Module
configurations
MU909060A1: Gigabit Ethernet module with one electrical RJ-45 port
One electrical or optical SFP module can be installed.
MU909060A2: Gigabit Ethernet module with two electrical RJ-45 ports
MU909060A3: Gigabit Ethernet module
Two electrical or optical SFP modules can be installed.
Electrical interfaces (if installed): 10/100/1000 Mbps RJ-45 (10BASE-T,
100BASE-TX, 1000BASE-T)
Optical interfaces (if installed, depending on model and SFP module): 100
or 1000 Mbps LC connector (100BASE-FX, 1000BASE-SX, 1000BASE-LX
or 1000BASE-ZX)
SW Options Option 001 RFC 2544 Test option
Option 002 Multistream option
Ethernet
Interfaces
Duplex modes: Full duplex; Electrical 10/100 Mbps also Half duplex
Test configurations: Monitor/Generate, Pass Through, Reflector
Reflector delay: 2.44 µ s @ 1000 Mbps, 5.16
µ
s @ 100 Mbps,
31.93
µ
s @ 10 Mbps
Specification of optical modules purchased from Anritsu for Network
Master Gigabit Ethernet tester:
NB: Correct functioning is only guaranteed with Anritsu optical modules
specifically for MU909060A Series. Modules with extended temperature
range (up to +85 ° C) must be used.