Anritsu Mainframe MU909060A Series, Operation Manual, Page: 112 / 190

Chapter 3 Application Ethernet
There are two generator modes as described below:
• GeMonitor
Generates traffic with the framing that is setup at Interface Setup and
at a rate specified at the Generator pane.
• Monitor only
Starts Generator test without transmitting frames
Note
If a test is started in the GeMonitor mode with no active
streams, it switches automatically to the Monitor Only mode
during the test.
There are three Duration modes:
• Continuous
Generator test runs until stopped manually
• Seconds
Generator test runs for specified number of seconds
• Frames
Generator test stops after specified number of frames sent
If no active streams are specified, the test stops immediately.
Note
When Continuous mode is set, the test runs until the user presses
the Start key, which will stop the whole test schedule. All tests in
the test schedule after this test are therefore never executed.
3-24