Anritsu Mainframe MU909060A Series, Operation Manual, Page: 57 / 190

2.1 Power Up/Power Down
2-3
2
General Operation
2.1 Power Up/Power Down
2.1.1 Power Up
Press the Menu/Power key. The Network Master performs a brief
self-test during which the Anritsu splash screen is displayed before
changing to the Top Menu screen.
Figure 2.1.1-1 Top Menu Screen
Caution
If a screen similar to the one shown above is not displayed
after power up, the Network Master may have failed the
self-test. Switch the unit off and on (power down/power
up) again. If the problem persists, contact the Anritsu
Technical Support Center or your local Anritsu
representative.
2.1.2 Power Down
1. Press the Menu/Power key to display a pop-up menu.
2. Use the Down arrow key to highlight Power Down in the menu.
3. Press the Set key to accept the highlighted menu selection. The
following message appears: “Are you sure you want to Power Down?”
4. Highlight Yes and press the Set key.
Forcibly Power Down at any time by pressing the Menu/Power key
for 10 s.