Anritsu Mainframe MU909060A Series, Operation Manual, Page: 158 / 190

Chapter 5 Pass through
5-2
5.1 Status
The Status screen is the first screen that is displayed when starting the
Pass Through application.
It gives an overview of the current hardware, Ethernet and SFP
(Optional) status. For details about the Status screen tabs, refer to
section 2.5.
Figure 5.1-1 Status Window, Basic tab
The three buttons on the right are controlled by the F1 to F3 soft keys.
F1 Displays Status screen
See Figure 5.1-1.
F2 Activates Setup Interface screen
which is used to setup the ports
See section 5.2.
F3 Shows test results for both ports
See section 5.4
These are the main soft keys for the Pass Through application and they
are shared by all screens.