Anritsu Mainframe MU909060A Series, Operation Manual, Page: 41 / 190

1.5 Top Connector Panel
1-17
1
Overvi
ew
To use the AC Charger/Adapter:
1. Open the cover on the Network Master 9 V DC Connector on the top
connector panel (Figure 1.5-1) and plug in the jack from the AC
Charger/Adapter.
2. Plug the AC Charger/Adapter transformer into an AC outlet
.
Note
Ensure that the AC Charger/Adapter transformer has the correct
plug.
3. Press the Menu/Power key to start the Network Master
.
CAUTION
Use the Network Master only with the Anritsu AC
Charger/Adapter.
Anritsu does not guarantee the safety and functionality of
other AC charger/adapters.
To charge the Ni-MH Battery Pack:
1. Power down the unit.
2. Open the cover on the Network Master 9 V DC Connector on the top
connector panel (Figure 1.5-1) and plug in the jack from the AC
Charger/Adapter.
3. Plug the AC Charger/Adapter transformer into an AC outlet
.
Note
Ensure that the AC Charger/Adapter transformer has the correct
plug.
4. When the battery pack is fully charged, the Battery Status LED is
lit green. See Battery Status LED for details. A full charge takes
about 3 hours.
Note
The Network Master will not charge the battery pack while it is
being operated.