Anritsu Mainframe MU909060A Series, Operation Manual, Page: 116 / 190

Chapter 3 Application Ethernet
The Payload setup pane specifies the frame payload. Detection of
Multistream frame loss is also enabled here.
Figure 3.3.1-5 Generator Setup Screen, Payload Pane
When the Multistream Frame Loss checkbox is checked, the transmitter
inserts the specified sequence number at the start of the frame payload
and the receiver starts detecting the sequence numbers.
To set up the generator, the user must consider the following:
• Whether the instrument should act only as a monitor or should
generate traffic too.
• The test duration.
•
The number of streams used when the Multistream option is installed.
• The Frame Size Profile to use.
•
Whether the destination addresses are specified.
• The type of payload to use.
3-28