Anritsu Mainframe MU909060A Series, Operation Manual, Page: 150 / 190

Chapter 4 Application Reflector
4-2
4.1 Status
The Status screen is the first screen that is displayed when starting the
Reflector application.
It gives an overview of the current hardware and Ethernet status. For
details about the Status screen tabs, refer to section 2.5.
Figure 4.1-1 Status Window, Basic tab
The three buttons on the right are controlled by the F1 to F3 soft keys.
F1 Displays Status screen
See Figure 4.1-1.
F2 Activates Setup Interface screen
which is used to setup ports and
the Reflector test
See section 4.2.
F3 Shows test results for both ports
See section 4.3
These are the main soft keys for the Reflector application and they are
shared by all screens.