Anritsu Mainframe MU909060A Series, Operation Manual, Page: 133 / 190

3.8 RFC2544 Tests
3-45
Frame Size pane
The Frame Size pane has checkboxes for the predefined sizes 64, 128,
256, 512, 768, 1024, 1280, 1518 and Jumbo Frame. The jumbo frame size
can be set from 1519 to 10000.
3
Ether
n
et Applicat
ion
Figure 3.8.1-4 RFC2544 Throughput Setup Screen, Frame Size Pane
Note
The RFC test cannot be started without selecting at least one
frame size.
Line Load pane
The Line Load setting range used in the test is specified as Min and Max.
The load is varied in intervals with the value specified in the Step field.
The test always starts at Max: and decreases until the line load is equal
to Min. Line loads can be in either Mbps or as a percentage of the current
line speed.
Figure 3.8.1-5 RFC2544 Throughput Setup Screen, Line Load Pane
If the Stop on no frame loss at maximum utilization checkbox is selected,
the test continues to test the next frame size when the current test step
at a specific line load and frame size do not have any frames lost. In
other words, the test ignores the rest of the steps.