Pike Technical Manual
V5.2.0
349
Configuration of the camera
Dependant on the parameter update mode the address/data pairs may become
active one by one or after the processing of the complete parameter list. A
parameter list may look like follows (the description is for your convenience):
Format_7 mode mapping
With Format_7 mode mapping it is possible to map special binning and sub-sam-
pling modes to F7M1..F7M7 (see
Figure 102: Mapping of possible Format_7
Address offset
Data quadlet
Description
0xF0F00608
0xE0000000
Set video format 7
0xF0F00604
0x00000000
Set video mode 0
0xF0F08008
0x00000000
Set image position
0xF0F0800C
0x028001E0
Set image size
0xF0F08044
0x04840484
Set BytePerPacket value
0xF0F0080C
0x80000100
Set shutter to 0x100
0xF0F00820
0x80000080
Set gain to 0x80
Table 184: Example:
parameter list
Note
•
The PARAMLIST_BUFFER shares the memory with the
GPDATA_BUFFER. Therefore it is not possible to use both
features at the same time.
•
Not all CSRs or features of a particular camera model can
be used with the parameter list feature.
Register
Name
Field
Bit
Description
0xF1000580
F7MODE_MAPPING
Presence_Inq
[0]
Indicates presence of this feature
(read only)
---
[1..31]
Reserved
0xF1000584
F7MODE_MAP_INQ
F7MODE_00_INQ
[0]
Format_7 Mode_0 presence
F7MODE_01_INQ
[1]
Format_7 Mode_1 presence
...
...
...
F7MODE_31_INQ
[31]
Format_7 Mode_31 presence
0xF1000588
Reserved
---
---
---
0xF100058C
Reserved
---
---
---
0xF1000590
F7MODE_0
Format_ID
[0..31]
Format ID (read only)
0xF1000594
F7MODE_1
Format_ID
[0..31]
Format ID for Format_7 Mode_1
Table 185: Advanced register:
Format_7 mode mapping