Pike Technical Manual
V5.2.0
219
Controlling image capture
Enabling this feature turns the camera into a special mode. This mode can be
used to set up a bunch of parameter sets for up to
MaxLength
consecutive
images.
Register
Name
Field
Bit
Description
0xF1000220
SEQUENCE_CTRL
Presence_Inq
[0]
Indicates presence of this feature
(read only)
---
[1..4]
Reserved
AutoRewind
[5]
ON_OFF
[6]
Enable/disable this feature
SetupMode
[7]
Sequence setup mode
---
[8..15]
Reserved
MaxLength
[16..23] Maximum possible length of a
sequence (read only)
SeqLength
[24..31] Length of the sequence (32 dez for
all CCD models)
0xF1000224
SEQUENCE_PARAM ---
[0..4]
Reserved
ApplyParameters
[5]
Apply settings to selected image of
sequence; auto-reset
---
[6..7]
Reserved
SeqStepMode
[8..15]
Sequence stepping mode
ImageRepeat
[16..23] Image repeat counter
ImageNo
[24..31] Number of image within a sequence
0xF1000228
SEQUENCE_STEP
Presence_Inq
[0]
Indicates presence of this feature
(read only)
---
[1..4]
Reserved
PerformStep
[5]
Sequence is stepped one item for-
ward
PerformReset
[6]
Reset the sequence to start position
---
[7..23]
Reserved
SeqPosition
[24..31] Get the current sequence position
Table 80: Advanced register:
Sequence mode
Note
The sequence mode of the Pike 3.x series firmware behaves
slightly different than the sequence mode of e.g. the Marlin
series and implements some new controlling features. You may
use a sequence with internal or external trigger and with the
Deferred Transport
feature.