Pike Technical Manual
V5.2.0
132
Description of the data path
The following window opens:
2.
Put on lens cap.
3.
Set gain adjustment slider and offset adjustment slider to 0.
4.
Click several times
Offset adjustment
until the slider does not move any
more.
5.
Put off lens cap.
6.
Take test sheet with vertical continuous b/w gradient, defocus lens and
start image acquisition.
7.
Activate
Gain auto adjustment
.
Now left and right channel should be adjusted for all grey values, so that
vertical line is no more visible.
8.
To save these settings in the user profiles: see Chapter
Table 196: User profile: stored settings
(CHANNEL_ADJUST_CTRL, CHANNEL_ADJUST_VALUE, ADV_CHN_ADJ_OFF-
SET, ADV_CHN_ADJ1).
Figure 71: SmartView: channel adjustment (gain+offset) (1.10 and greater)
