Pike Technical Manual
V5.2.0
341
Configuration of the camera
You can save the current value in the user sets and set to default value.
Soft reset
The
soft reset
feature is similar to the INITIALIZE register, with the following
differences:
•
1 or more bus resets will occur
•
the FPGA will be rebooted
The reset can be delayed by setting the
Delay
to a value unequal to 0.
The delay is defined in 10 ms steps.
0xF1000434 ADV_CHN_ADJ1
---
[0..15]
Reserved
Offset_Value
[16..31]
Signed 16-bit value
-255...0...+256
SmartView shows only:
-255...0...+255
Note:
Direct register access.
up to +256 whereas
SmartView: up to +255)
Note
Doing the
dual-tap offset adjustment
in SmartView: Refer to
the
FirePackage/FirePackage64 SmartView Manual
.
Register
Name
Field
Bit
Description
0xF1000510 SOFT_RESET
Presence_Inq
[0]
Indicates presence of this
feature (read only)
---
[1..5]
Reserved
Reset
[6]
Initiate reset
---
[7..19]
Reserved
Delay
[20..31]
Delay reset in 10 ms steps
Table 176: Advanced register:
Soft reset
Register
Name
Field
Bit
Description
Table 175: Advanced register:
Dual-tap offset adjustment
