Pike Technical Manual
V5.2.0
162
Description of the data path
•
Activate/Deactivate defect pixel correction (factory default setting: acti-
vated on startup of
SmartView
)
•
Save/load of Allied Vision-own defect pixel map for external use
•
Displaying current defect pixels of the camera
•
Add/remove defect pixels
With an upload to and download from the camera you can manipulate the defect
data stored in the camera. Additionally you can activate and deactivate defect
pixel correction entirely.
Section
Check box / button/ combo box/
list / slider
Description
Defect pixel correction
Defect pixel correction on
Activate check box for applying defect pixel
correction.
Note:
This check box is not activated on
SmartView startup in general.
Activation of DPC is factory default for the
camera. Setting of the check box is only
dependant on current setting in the camera,
but not on startup of SmartView.
Edit sensor defects
Loads current defect pixel data into the cam-
era and opens the Defect pixel editor in
SmartView
.
Table 51: SmartView Edit settings:
Adv 4
tab (Defect pixel correction)
