Pike Technical Manual
V5.2.0
329
Configuration of the camera
Shading correction
Owing to technical circumstances, the interaction of recorded objects with one
another, optical effects and lighting non-homogeneities may occur in the
images.
Because these effects are normally not desired, they should be eliminated as far
as possible in subsequent image editing. The camera has automatic shading cor-
rection to do this.
Provided that a shading image is present in the camera, the
on/off
bit can be
used to enable shading correction.
The
on/off
and
ShowImage
bits must be set for saved shading images to be dis-
played.
Note
•
Always make sure that the shading image is saved at the
highest resolution of the camera. If a lower resolution is
chosen and ShowImage is set to
true
, the image will not
be displayed correctly.
•
The shading image is computed using the current video
settings. On fixed video modes the selected frame rate
also affects the computation time.
•
The build process will not work, if a MONO16/RGB16 for-
mat is active.
