Allied Vision Pike F-032B/C Technical Manual Download Page 344

Page: 344 / 376

Pike Technical Manual

V5.2.0

344

Configuration of the camera

Restrictions

Note the restrictions in the following table. When using software with an
Isochronous Resource Manager (IRM): deactivate it.

Operation

The maximum allowed isochronous packet size can be set separately for the ISO
speeds S400 and S800. Check the associated

Presence_Inq

flag to see for which

ISO speed this feature is available.

Setting the

Set2Max

flag to 1 sets the

MaxIsoSize

field to the maximum sup-

ported isochronous packet size. Use this flag to query the maximum supported
size (may depend on the camera model).

Enable this feature by setting the

ON_OFF

flag to 1 and the

MaxIsoSize

field to

a value greater than the default packet size.

The camera ensures:

•

that the value of the

MaxIsoSize

field is a multiple of 4.

•

that the value isn’t lower than the value specified by the IEEE1394 specifi-
cation.

The settings are stored in the user sets.

Software

Restrictions

FireGrab

Deactivate Isochronous Resource Manager:



SetParameter (FGP_USEIRMFORBW, 0)

FireStack/FireClass

No restrictions

SDKs using Microsoft driver
(Active FirePackage,



Direct FirePackage, ...)

n/a

Linux: libdc1394_1.x

No restrictions

Linux: libdc1394_2.x

Deactivate Isochronous Resource Manager:



Set DC1394_CAPTURE_FLAGS_BANDWIDTH_ALLOC flag to 0

Third Party Software

Deactivate Isochronous Resource Manager

Table 179: Restrictions for feature:

Maximum ISO packet size

Note



Enabling this feature will not change the

MaxBytePerPacket

value automatically. The camera may not use the new
isochronous packet size for the

MaxBytePerPacket

value until

a write access to the desired Format_7 mode has been issued.

Summary of Contents for Pike F-032B/C

























































































































































































































































































































































































Search results

Summary of Contents for Pike F-032B/C

Reviews:

Related manuals for Pike F-032B/C

Brands by name

Popular brands

Allied Vision Pike F-032B/C, Technical Manual

Search results

Summary of Contents for Pike F-032B/C

Reviews:

Related manuals for Pike F-032B/C

Brands by name

Popular brands