Pike Technical Manual
V5.2.0
347
Configuration of the camera
Software feature control (disable LEDs / switch
single-tap and dual-tap)
The software feature control register allows to enable/disable some features of
the camera (e.g. disable LEDs or switch single-tap and dual-tap for Pike F-1100/
1600). The settings are stored permanently within the camera and do not
depend on any user set.
Disable LEDs
•
To disable LEDs set bit [17] to 1.
•
To disable LEDs in SmartView:
Adv3
tab, activate
Disable LED functionality
check box.
The camera does not show any more the status indicators during normal opera-
tion:
Examples:
•
Power on is not shown
•
Isochronous traffic is not shown
•
Asynchronous traffic is not shown
Register
Name
Field
Bit
Description
0xF1000640 SWFEATURE_CTRL
Presence_Inq
[0]
Indicates presence of this feature
(read only)
BlankLED_Inq
[1]
Indicates presence of
Disable LEDs
feature.
DigitizationTaps_Inq [2]
Indicates presence of
Sensor
digitization taps
feature.
---
[3..5]
Reserved
SensorTaps_Inq
[6]
Indicates presence of
Sensor taps
feature.
---
[7..15]
Reserved
---
[16]
Reserved
BlankLED
[17]
0: Behavior as described in Chapter
1: Disable LEDs. (Only error codes
are shown.)
DigitizationTaps
[18..21] 0: single-tap
1: dual-tap
SensorTaps
[22..25] Max number of taps -1
---
[26..31] Reserved
Table 182: Advanced register:
Software feature control
(disable LEDs/switch single-tap and dual-tap)
