Allied Vision Pike F-032B/C, Technical Manual

Page: 24 / 376

Pike Technical Manual V5.2.0
24
Introduction
continued from previous page
V5.0.1
[continued]
08.06.10
[continued]
Changed and new CAD drawings for Pike F-1100/1600:
• Changed CAD drawings with corrected mount dimensions:
see
Figure 41: Pike F-Mount dimensions (standard for Pike
F-1100 and Pike F-1600) on page 89, Figure 48: Pike M42-
Mount dimensions (optional for Pike F-1100 and Pike F-
1600)
on page 96 and Figure 54: Pike M58-Mount dimen-
sions (optional for Pike F-1100 and Pike F-1600) on page
102.
• Added CAD drawings for Pike F-1100/1600 GOF versions
incl. W270 models: Chapter
Camera dimensions on page
67ff.
V5.0.2 09.08.10 Changed sensitivity curve:
• For Pike F-032B: due to new KODAK sensor data sheet for
KAI-0340, the new sensitivity curve was added, see
Figure
5: Spectral sensitivity of Pike F-032B on page 59.
Changed trigger diagram:
• Added trigger delay and connection between trigger delay
and Busy signal, see
Figure 62: Output impulse diagram on
page 118
New file format:
• Converted FrameMaker files from FM7 to FM9
Improved description of HSNR mode:
• Added info that for 8-bit video modes, the internal HSNR
calculations are done with 14 bit: Chapter
High SNR mode
(High Signal Noise Ratio) on page 185
to be continued on next page
Version Date Remarks
Table 1: Document history