Pike Technical Manual
V5.2.0
48
Specifications
Pike F-145B/C (fiber) (-15fps*)
* Variant: F-145-15fps only
This variant offers lower speed (only 15 fps), but better image quality.
Standard accessories
b/w:
protection glass
color:
IR cut filter
Optional accessories
b/w:
IR cut filter, IR pass filter
color:
protection glass
On request
Host adapter card, angled head, power out (HIROSE)
Software packages
http://www.alliedvision.com/en/support/software-downloads
(free of charge)
Feature
Specification
Image device
Type 2/3 (diag. 11.2 mm) type progressive scan SONY ICX285AL/AQ with EXview
HAD microlens
Effective chip size
9.0 mm x 6.7 mm
Cell size
6.45 μm x 6.45 μm
Picture size (max.)
1388 x 1038 pixels (Format_7 Mode_0)
Lens mount
Adjustable C-Mount: 17.526 mm (in air); Ø 25.4 mm (32 tpi)
mechanical flange back to filter distance: 12.5 mm
(see
Figure 34: Pike C-Mount dimensions (large filter)
ADC
14 bit
Color modes
Only color:
Raw8, Raw12, Raw16, Mono8, YUV422, YUV411, RGB8
Frame rates
1.875 fps; 3.75 fps; 7.5 fps; 15 fps; 30 fps (* Variant: F-145-15fps only up to 15 fps)
up to 30 (16*) fps in Format_7 (Mono8/12 no sub-sampling)
Gain control
Manual: 0-32
dB (0.0358
dB/step); auto gain (select. AOI)
Shutter speed
39 (71*)
μs … 67,108,864 μs (~67s); auto shutter (select. AOI)
External trigger shutter Programmable, trigger level control, single trigger,
bulk trigger, programmable trigger delay
Internal FIFO memory
Up to 22 frames
Look-up tables
16 user-defined (14 bit
14 bit); gamma (0.45 and 0.7)
Table 10: Specification Pike F-145B/C (fiber)
Feature
Specification
Table 9: Specification Pike F-100B/C (fiber)
