Pike Technical Manual
V5.2.0
342
Configuration of the camera
High SNR mode (High Signal Noise Ratio)
With
High SNR
mode enabled the camera internally grabs
GrabCount
images
and outputs a single averaged image.
Note
When SOFT_RESET has been defined, the camera will respond
to further read or write requests but will not process them.
Register
Name
Field
Bit
Description
0xF1000520
HIGH_SNR
Presence_Inq
[0]
Indicates presence of this feature
(read only)
---
[1..5]
Reserved
ON_OFF
[6]
High SNR mode on/off
The camera must be idle to toggle
this feature on/off. Idle means: no
image acquisition, no trigger.
Set grab count and activation of
HighSNR in
one single write
access
.
---
[7..22]
Reserved
GrabCount
[23..31]
Number of images (min. 2)
2
n
images with n=1..8 (automati-
cally)
Table 177: Advanced register:
High Signal Noise Ratio (HSNR)
Note
•
The camera must be idle to toggle this feature on/off.
Idle means: no image acquisition, no trigger.
•
Set grab count and activation of HighSNR in
one single
write access
.
