Pike Technical Manual
V5.2.0
348
Configuration of the camera
Sensor digitization taps (Pike F-1100/1600
only)
The sensor digitization taps fields
DigitizationTaps
[18..21] and
SensorTaps
[22..25] allow to switch between single-tap and dual-tap mode of a multi-tap
sensor (Pike F-1100/1600). The settings are stored permanently within the
camera and do not depend on any user set.
•
To switch single-tap set bit [18..21] to 0.
•
To switch dual-tap set bit [18..21] to 1.
•
To get info how many taps are present read out bit [22..25].
– 0 indicates 1 tap.
– 1 indicates 2 taps.
Parameter-List Update
The parameter list is an array of address/data pairs which can be sent to the cam-
era in a single bus cycle.
Note
During the startup of the camera and if an error condition is
present, the LEDs behave as described in Chapter
Note
After switching the number of tabs reboot the camera by
releasing a SoftReset.
Register
Name
Field
Bit
Description
0xF1100000
PARAMLIST_INFO
Presence_Inq
[0]
Indicates presence of this feature
(read only)
---
[1..15]
Reserved
BufferSize
[16..31]
Size of parameter list buffer in
bytes
0xF1101000
...
0xF1101nnn
PARAMLIST_BUFFER
Table 183: Advanced register:
Parameter-List Update
: parameter list
