Allied Vision Pike F-032B/C, Technical Manual

Page: 22 / 376

Pike Technical Manual V5.2.0
22
Introduction
continued from previous page
V5.0.0
[continued]
07.05.10
[continued]
[continued]
New Pike F-1100 and Pike F-1600 models:
• Chapter F-Mount on page 83ff.
• Chapter M42-Mount on page 91ff.
• Chapter M58-Mount on page 97ff.
• Chapter Exposure time offset on page 209
• Chapter Minimum exposure time on page 209
• Figure 113: Data flow and timing after end of exposure on
page 214
• Table 78: Jitter at exposure start (no binning, no sub-sam-
pling)
on page 217
• Table 201: Default gain references of Pike models on page
363
• Chapter Software feature control (disable LEDs / switch sin-
gle-tap and dual-tap) on page 347
• Chapter Pike F-1100B / Pike F-1100C on page 242
• Chapter Pike F-1600B / Pike F-1600C on page 244
• Chapter Pike F-1100: AOI frame rates on page 265ff.
• Chapter Pike F-1600: AOI frame rates on page 273ff.
New Pike front flange:
• Serial numbers for Pike camera models starting new front
flange: Chapter
Serial numbers for starting new front
flange on page 67
• Added photo of Pike 11M/16M on title page
Minor corrections and improvements:
• Improved description on low noise binning: Chapter Low-
noise binning mode (only 2 x H-binning) on page 346
• Corrected MaxValue from [0..31] to [6..31] in Table 168:
Advanced register: Auto shutter control on page 335
• Corrected: Pike F-145C has Raw12 formats (F7M0, F7M4,
F7M5, F7M6) in
Table 88: Video Format_7 default modes
Pike F-145B / F-145C on page 235
• Improved description of debounce feature in Chapter
Debounce on page 207
New storage temperature:
• 70 °C, see Chapter Specifications on page 45ff.
to be continued on next page
Version Date Remarks
Table 1: Document history