Allied Vision Pike F-032B/C Technical Manual Download Page 359

Page: 359 / 376

Pike Technical Manual

V5.2.0

359

Configuration of the camera

The

ProfileID

is equivalent to the memory channel number and specifies the

profile number to store settings to or to restore settings from. In any case profile
#0 is the hard-coded factory profile and cannot be overwritten.

After an initialization command, startup or reset of the camera, the

ProfileID

also indicates which profile was loaded on startup, reset or initialization.

Store

To store the current camera settings into a profile:

Write the desired

ProfileID

with the

SaveProfile

flag set.

Read back the register and check the

ErrorCode

field.

Restore

To restore the settings from a previous stored profile:

Write the desired

ProfileID

with the

RestoreProfile

flag set.

Read back the register and check the

ErrorCode

field.

Set default

To set the default profile to be loaded on startup, reset or initialization

Write the desired

ProfileID

with the

SetDefaultID

flag set.

Read back the register and check the

ErrorCode

field.

Error codes

Note



•

The default profile is the profile that is loaded on power-
up or an INITIALIZE command.

•

A save or load operation delays the response of the cam-
era until the operation is completed. At a time only one
operation can be performed.

ErrorCode #

Description

0x00

No error

0x01

Profile data corrupted

0x02

Camera not idle during restore operation

0x03

Feature not available (feature not present)

0x04

Profile does not exist

0x05

ProfileID out of range

0x06

Restoring the default profile failed

0x07

Loading LUT data failed

0x08

Storing LUT data failed

Table 195: User profiles:

Error codes

Summary of Contents for Pike F-032B/C

























































































































































































































































































































































































Search results

Summary of Contents for Pike F-032B/C

Reviews:

Related manuals for Pike F-032B/C

Brands by name

Popular brands

Allied Vision Pike F-032B/C, Technical Manual

Search results

Summary of Contents for Pike F-032B/C

Reviews:

Related manuals for Pike F-032B/C

Brands by name

Popular brands