Pike Technical Manual
V5.2.0
360
Configuration of the camera
Reset of error codes
The
ErrorCode
field is set to zero on the next write access.
You may also reset the
ErrorCode
•
by writing to the
USER_PROFILE
register with the
SaveProfile
,
Restore-
Profile
and
SetDefaultID
flag not set.
•
by writing 00000000h to the
USER_PROFILE
register.
Stored settings
The following table shows the settings stored inside a profile:
The user can specify which user profile will be loaded upon startup of the camera.
This frees the user software from having to restore camera settings, that differ
from default, after every cold start. This can be especially helpful if third party
software is used which may not give easy access to certain advanced features or
may not provide efficient commands for quick writing of data blocks into the
camera.
Standard registers
Standard registers
(Format_7)
Advanced registers
Cur_V_Frm_Rate
Cur_V_Mode
Cur_V_Format
ISO_Channel
ISO_Speed
BRIGHTNESS
AUTO_EXPOSURE (Target grey level)
SHARPNESS
WHITE_BALANCE (+ auto on/off)
HUE (+ hue on)
SATURATION (+ saturation on)
GAMMA (+ gamma on)
SHUTTER (+ auto on/off)
GAIN
TRIGGER_MODE
TRIGGER_POLARITY
TRIGGER_DELAY
ABS_GAIN
IMAGE_POSITION (AOI)
IMAGE_SIZE (AOI)
COLOR_CODING_ID
BYTES_PER_PACKET
TIMEBASE
EXTD_SHUTTER
IO_INP_CTRL
IO_OUTP_CTRL
IO_INTENA_DELAY
AUTOSHUTTER_CTRL
AUTOSHUTTER_LO
AUTOSHUTTER_HI
AUTOGAIN_CTRL
AUTOFNC_AOI (+ on/off)
COLOR_CORR (on/off + color correction
coefficients)
TRIGGER_DELAY
MIRROR_IMAGE
HIGH_SNR
LUT_CTRL (LutNo; ON_OFF is not saved;
up to 16 LUTs can be saved in 4 user sets)
SHDG_CTRL (on/off + ShowImage)
DEFERRED_TRANS (H
NumOfImages)
CHANNEL_ADJUST_CTRL
CHANNEL_ADJUST_VALUE
ADV_CHN_ADJ_OFFSET
ADV_CHN_ADJ1
Table 196: User profile:
stored settings
