Pike Technical Manual
V5.2.0
163
Description of the data path
Editor
Check box / buttons Description
Edit defect pixels
Save file
Saves defect pixel data in a CSV file (Allied Vision -own
defect pixel file).
Load file
An
Open
dialog opens.
Choose the following file type:
•
Allied Vision defect files (*.csv) [defect values are
loaded into the
Edit sensor defects
dialog]
Add defect
Here you can add more defect pixels manually. For a
single defect pixel enter X and Y value.
For a column enter X value only (whole column defect) or
X and Y value and height (partial column defect).
Remove
Mark one or more defect pixels and click
Remove
to
delete defect pixels.
Clear
Deletes all defect pixels from the editor.
Upload
Changed defect pixel data are loaded into the camera. If
you clicked
Clear
, the defect pixel map in the camera is
deleted.
Cancel
Cancels all actions done in the editor.
Table 52: SmartView Edit settings:
Adv 4
tab (Defect pixel correction editor)
Info
We strongly recommend to save the
defect pixel map (stored in the camera)
into a csv file, before uploading data.
